Rank: Member
Posts: 1
|
Hi,
I have a problem by the Security Monitor Pro 2.2
The cpu is working by 100% when monitoring . I have 4 IP digicam on this pc.
The pc hardware is:
CPU P3 /1000
SDram 512
The other pc is
P4 2600
DDR 1GB
The cpu is working 100% when monitoring
There is a solution?
Sorry for my English
Sincerely
T.Stender
|
Rank: Administration
Posts: 1,018
|
You can reduce CPU load by decreasing the frame rate for your cameras. Click on the Settings button for each camera (the button farthest to the right on the camera window). Switch to the IP Cameras tab, and use the drop-down list to choose 1 frame per second.
A Pentium 3-based computer may be overtaxed when monitoring 4 cameras simultaneously. The Pentium 4 system should monitor all four without being overloaded.
DeskShare - Support
|